CBWI August 2001 Magnum Maverick A24 Conversion

The conversion is very simple and is the same as the Connex 3300, General Lee and other similar 10-meter radios. Just remove the four 100 Ohm resistors on the bottom of the main circuit board in the PLL area. Reference the photo below for the four resistors.
94629
I will cover the adjustment potentiometers when I write an update review on the Maverick A24 once I get my hands on a production radio. The designators will most likely change on the production unit. To publish them as they are in this unit would only cause confusion once the production radio is released. Bob F
Click Here to Leave a Comment Below 0 comments

Leave a Reply: